Clik here to view.
Re: CPU upgrade for optiplex gx260
Max is a specific NORTHWOOD. NO PRESCOTTS NO 800MHZ FSB.Max Universal 2.8Ghz OEM CPU is RK80532PC072512, SL7EYBIOS - BIOSDescriptionImportanceVersionReleasedSupported OSDownloadDell OptiPlex System...
View ArticleRe: Unable to start PC: Error Code 0x0 and Problem Signature = 6.1.7600.16385
Have you Tried F8 startup repair? It could be the drive is dying and startup repair will Kill it entirely.Depends on what your data is worth to you.
View ArticleRe: Optiplex 780 not getting past POST. No beep codes
I always discharge the static as a matter of course, usually for one minute to be sure. I have replaced the RAM, swapped out the power supply and reseated the processor. Disconnected all USB items,...
View ArticleRe: iAMT disabled on optiplex 9010 aio
When i press 'F12', i see boot menu and list of other options: Bios Setup, Diagnostics and Change Boot Mode Settings. There is no option MEBx. I have a bios revision A07.
View ArticleRe: Precision T7400 CPU temperatures
Perry,Given the 100°C spec referenced in CoreTemp FAQ, I've been content to let the system hammer away at 80-90°C. It's been running all 8 cores that way consistently since my last post, and I have...
View ArticleClik here to view.
Re: iAMT disabled on optiplex 9010 aio
MEBx is not on all systems AND if someone chose to Disable it then it cannot be RE enabled EVER AGAIN.MEBx is also not available in all countries. This is what it looked like on the 755Article ID :...
View ArticleDell Vostro 260 will not boot consistantly
We have two identical Dell Vostro 260 towers that will not power up. It was thought there was a bad power switch on one PC because it appeared to the user that, if it pressed enough times, the PC would...
View ArticleRe: DBRM - Windows Recovery Environment doesn't have DBRM Option
Install Base Windows with the same partition structure on the Machine and then and try doing a fresh install of (Dell Backup and Recovery) from the following link: http://bit.ly/UUjIs0What you think...
View ArticleT3500 Dual Monitor Problem
I have been having problems with my T3500 workstation and dual U2410 monitors, usually the machine runs great apart from the flickering of the screens on startup and ocassional problem with the...
View ArticleRe: Dell Vostro 260 will not boot consistantly
Dell system diagnostics reports no errors...
View ArticleInspiron 546 - Hard Drive Parameter Has Exceeded Operating Range
Yesterday I updated my Insprion 546 WIn 7 Home 64 Bit computer from the drivers section. I used updates R289543 -Dell Support Center; R219774 - Audio; I546-A11 - BIOS; R230060 - Video. In that order....
View ArticleRe: XPS one 2710 touchscreen stops working after remote desktop session
I posted a "rich formatting" answer which for some reason didn't appear so I'll post again.The touchscreen exhibited a "ghosting" affect which I believe to be a precursor to the complete non function...
View ArticleRe: Inspiron 546 - Hard Drive Parameter Has Exceeded Operating Range
Hi Ather,This can be a hard drive failure. To isolate the issue, I recommend running PC check on the hard drive to check if its hardware/software issue.Click on the following link to run PC check on...
View ArticleRe: Dell Dimension 8200 Blinking YELLOW LIGHT, HELP PLEASE!
So just another update. The blinking yellow light is gone and the computer starts up. Immediately after the initial screen (with the Dell logo) that pops up when the power button is pressed, it lets...
View ArticleDell monitor problem
So I made a thread about my monitor issue and has yet to be resolve but I have a question. When I plug my monitors vga cable into the back panel connector it gets stuck in sleep mode and possibly...
View ArticleOptiplex GX620 Will not start, no lights; amber light only on MB
I have several GX620's I am rehabbing and none will turn on; I see an amber light on the motherboard, but cannot tell if this is a PS issue or a MB issue?Any suggestions?Thanks
View ArticleClik here to view.
Re: Dell Factory Image Restore (Format Recovery)
I do not understand what you mean by a manual re-installation. Maybe my description under will answer that.Yes, my computer is capable of booting into windows.I couldn't take a screenshot so I just...
View Article