Re: Restore System is Unsuccessful
Hi Dinesh.P,May I know the reason for a system restore?The software on the computer might be corrupt.You may try PC restore (factory reset) on the computer.Refer the following link which has steps to...
View ArticleInspiron 2305 touch screen stops
I have an Inspiron 2305 that I just replaced the motherboard on. Everything went well on replacement everything was working. then touch screen stopped working. Went to Dell ran diagnostics it...
View ArticleRe: Dimension E520 not starting properly
Hi humphreyhorse,Thanks for the video.Have you tried changing the Video controller option in BIOS, when you have disconnected the video card from the system?Does the system have dual Video cards...
View ArticleRe: Restore System is Unsuccessful
Dinesh.PHi alli am using Windows XP professional . i want to restore my system i am doing "Start--> All programs-->Accessories--> System Tools-->System Restore " is click error message is...
View ArticleRe: XPS 8100 no boot
Hi kiko29,You may try to make changes to power settings. Please follow the steps below:Open ‘Device Manager’Click ‘Power options’Click ‘Change Plan Settings’ for the selected planChoose the time for...
View ArticleClik here to view.
Re: XPS 8100 no boot
For the sleeping i think we are ok now...hopefullyFor the monitor going to sleep when i work, i can tell you that is not the monitor or video card since was happening before i changed the monitor and i...
View ArticleRe: Video Card for Optiplex 760
The 7770 is a step up from the GT630, and there are lots of them on Newegg.Are you needing this for gaming?
View ArticleRe: Inspiron 2305 touch screen stops
Hi larrysr1,You may try to calibrate the touch screen. Please follow the steps below:Click Windows Start button & Access Control panelSelect ‘Tablet PC Settings from the Control Panel’Click on...
View ArticleRe: XPS 8100 no boot
Hi kiko29,Thank you for the information. You may try uninstalling and reinstalling the display drivers. You may install the driver from the link: http://dell.to/10TfFmu.Keep me posted with the results....
View Articlewhere is my IRQ3?
So I was trying to add a license dongle thing onto an old system. It didn't work, so checking devmgr i do not see a Com2. Tried adding but that didn't work either. So using msinfo32 I see there is no...
View ArticleRe: XPS 8500 Win 8 Onboard VGA problems
I completed the steps above and everything worked perfect. Until a storm rolled through, shut down power and is stating my AMD driver is corrup. I downloaded a new driver but it will not access the 2nd...
View ArticleRe: Inspiron 2305 touch screen stops
Tried and I do not have a Tablet PC Setting in the control panelI did a complete diagnostics test on the dell web site and it started working during the test and it lasted for a few minutes after the...
View ArticleRe: where is my IRQ3?
XP is not MSDOS and Debug inside a CMD window is not relevant toISA IRQ Requests. This is also why they dropped ISA IRQ's in XP.You can only have that in NON ACPI bios with Microsoft Windows 95...
View ArticleRe: Windows Setup could not configure Windows on this computer’s hardware
The XPS 420 uses SATA not PATA drives and therefore Master/Slave/Cable Select would not apply.
View ArticleRe: adding a slave drive to a Dimension 3000
Thanks Bev - will update when the hardware arrives. This is a stop-gap till I can find a firewire Dell with more memory capability and maybe even a more powerful cpu.
View ArticleClik here to view.
Re: 1394a card for Optiplex 9010 MT PCI or PCIe?
If the 9010 has regular PCI Slot thenThe card I am referring to is Dell PN...
View ArticleRe: How to remove the heatsink fan on Dell inspiron 570?
the guide didnt help at all...the screws wont come out and there's no level or clamp on the side to pull up.
View ArticleRe: 1394a card for Optiplex 9010 MT PCI or PCIe?
For PCI-E Slotswww.siig.com/.../dp-firewire-2-port-pcie.htmlChipset: Texas Instruments TI XIO2200AZGWBus type: PCI Express x1Port type: Two, 6-pin external, FireWire (1394a), FemaleCompliant with PCI...
View Article