sorry for the slow response, I've been pretty busy lately. my case has room for three dvd drive bays and I only needed two so I custom made a mount with one of the bay covers so that I have the dell usb inputs, the green connector should be plugged into the front usb or #17 of your above diagram and the tan should be at #18, I hooked my case usb inputs into the internal usb socket. I will note that my front panel inputs supplied with the case do not have an autoplay feature meaning that if I plug something into the usb I have to locate that drive myself. don't forget about the jumper wire from pin 5 to pin 9 on the power connector
↧